Find
02. Feb. 2024

Eurex

NUR IN ENGLISCH VERFÜGBAR – T7 Simulation: Increase in the number of partitions and change of the Partition ID for the FX Derivatives products

Eurex-Rundschreiben 016/24 NUR IN ENGLISCH VERFÜGBAR – T7 Simulation: Increase in the number of partitions and change of the Partition ID for the FX Derivatives products

1.  Introduction

Eurex Exchange is planning to increase the number of partitions available in the T7 simulation environment (MIC: XEUR) from five to six. Following the addition of the new partition (Partition 6), the existing FX Derivatives products (ParentMktSegmID: FCUR and OCUR), currently located on Partition 1, will be redistributed to the new partition from the business day 16 February 2024 onwards.

The existing multicast addresses for the distribution of the market data via the EMDI, EOBI and MDI interfaces will remain unchanged. Participants with HF-sessions (HF-sessions always use the partition-specific gateways) will be directly affected by these changes. The product reference data will be modified accordingly to reflect the new partition ID.

2.  Required action

Moving products from one partition to another may lead to a scenario where GTC/GTD* orders entered and owned by one HF-session come to reside on two different partitions. As a HF-session login is always partition-specific (via a partition-specific gateway), the respective owning session needs to login to the new partition to manage orders for products which have been moved. To manage orders for products which have not been moved, the owning session needs to login to the old partition.

Participants using partition-specific gateways may require additional HF-sessions for the new partition and must therefore ensure that they order them via the Member Section of Deutsche Börse Group.

* GTC = Good Till Cancelled; GTD = Good Till Date

3.  Details

The following products currently on Partition 1 are affected:

Product

Product Type

Partition-ID (old)

Partition-ID (new)

FCBU, FCDK, FCEF, FCEP, FCEU, FCMU, FCNK, FCPF, FCPU, FCSK, FCUF, FCUW, FCZE, RSAU, RSAY, RSEA, RSEY, RSUF, RSUY

FCUR

1

6

AYCO, EUCO

OCUR

1

6

The new IP addresses for the partition specific gateways for Partition 6 will be as follows: 

PartitionID

Active PS Gateway

Participant Connection

Standby PS Gateway

Participant Connection

6

193.29.89.151

Side A

193.29.89.183

Side B

An updated version of the N7 Network Access Guide containing the above-mentioned changes will be available on the Eurex website www.eurex.com under the link:

Support > Initiatives & Releases > T7 Release 12.0 > Network Access

Please note that Partition 6 will also be available in the T7 Disaster Recovery Environment and there will be an opportunity to test the new setup as part of the T7 Disaster Recovery Test on 16 March 2024. More information on the T7 Disaster Recovery Test can be found in Eurex Circular 004/24.
 

Further information

Recipients:

All Trading Participants of Eurex Deutschland and Vendors

Target groups:

Front Office/Trading, IT/System Administration

Contact:

Technical Key Account Manager via your VIP number or cts@deutsche-boerse.com

Web:

www.eurex.com

Authorized by:

Wolfgang Eholzer


Marktstatus

XEUR

Das Markt-Statusfenster gibt Hinweise  zur aktuellen technischen Verfügbarkeit des Handelssystems. Es zeigt an, ob Newsboard-Mitteilungen zu aktuellen technischen Störungen im Handelssystems veröffentlicht wurden oder in Kürze veröffentlicht werden.

Weiterführende Informationen zur Handhabung von Störungen finden Sie im Emergency Playbook, das Sie auf der Eurex Internetseite unter Support --> Emergencies and safeguards (nur in Englischer Sprache verfügbar) finden. Detaillierte Informationen zur Kommunikation während einer Störung, zu Wiedereröffnungsmaßnahmen und Handlungsempfehlungen für den Order- und Transaktionsabgleich finden Sie in den Kapiteln 4.2, 4.3 bzw. 4.4. Konkrete Informationen bezüglich der jeweiligen Störung werden während der Störung über Newsboard Message veröffentlicht. 

Wir empfehlen dringend, aufgrund der Hinweise im Markt-Statusfenster keine Entscheidungen zu treffen, sondern sich in jedem Fall auf dem Produktion Newsboard  umfassend über den Vorfall zu informieren.

Das sofortige Update des Markt-Status erfordert eine aktivierte und aktuelle Java™ Software für den Web Browser.