Find
06 Nov 2023

Eurex

T7 Release 12.0: Important information for production start

Eurex Circular 095/23 T7 Release 12.0: Important information for production start

1.    Introduction

Deutsche Börse Group will launch Release 12.0 of the T7 trading system on 20 November 2023

The support window for T7 Release 12.0 will take place on Saturday, 18 November 2023, between 15:00 and 18:00 CET. Connectivity testing during the support window is strongly recommended for all participants and Multi-Member Service Providers. 

The circular outlines the most important topics for the go-live preparation that should be considered for the production launch of T7 Release 12.0 as well as details about the support window.

Learn now more about T7 Release 12.0 on our dedicated initiative page on the Eurex website www.eurex.com under the following link: Support > Initiatives & Releases > T7 Release 12.0

System documentation, circulars, timeline and much more information is available there for you.

2.    Required action

Participants are requested:

  • to complete and return the production readiness statement (see section 3.F.) and
  • to register a Technical Contact for the support window (see section 3.E.)

not later than Friday, 10 November 2023.

3.    Details

Deutsche Börse Group will launch Release 12.0 of the T7 trading system on 20 November 2023. Please refer to the dedicated document “T7 Release 12.0 Final Release Notes” for a full overview of both the new and changed functional scope. The document is available on the dedicated initiative page via the link:

Support > Initiatives & Releases > T7 Release 12.0 > System Documentation > Overview and Functionality

A.  Backward compatibility

T7 Release 12.0 is a mandatory release and will not provide backwards compatibility for the T7 ETI/FIX LF interface version 11.1, i.e. participants who do not want to use the new functionality will not be able to connect to T7 with the interface layout version 11.1 or older after the launch of T7 Release 12.0.

Public market and reference data interfaces, including EOBI, EMDI, MDI, RDI/RDF, as well as reports and data files, will not provide backwards compatibility.

B.  Preparations for Friday, 17 November and Saturday, 18 November 2023

On Friday, 17 November 2023, T7 Release 11.1 will be in production for the last time. Reports for the business day 17 November 2023 can be expected at the usual time.

On Saturday, 18 November 2023, Deutsche Börse will convert the T7 production system to Release 12.0 and initial reference data for business day 20 November 2023 will be available via RDI and RDF following the start of the system in preparation for the support window. 

C.  Support window for T7 Release 12.0 on Saturday, 18 November 2023

The T7 Release 12.0 support window will be conducted on Saturday, 18 November 2023, between 15:00 and 18:00 CET. Connectivity testing during the support window is strongly recommended for all participants and Multi-Member Service Providers to ensure connectivity for the start of trading on Monday, 20 November 2023. Please make sure that a staff member will be available to perform the login to the T7 production system (e.g. T7 Trader and/or Admin GUI and third-party applications).

At this time, the T7 production system will be available for connectivity testing on the ETI, FIX LF, RDI, MDI, EMDI and EOBI interfaces and via T7 Admin-, T7 Clearer- and T7 Trader GUI. No order and quote entries will be possible.

The T7 Production Public Key for ETI password encryption will be published on the Eurex website prior to the connection test under the path:

Support > Initiatives & Releases > T7 Release 12.0 > System Documentation > Trading Interfaces

Please note that during the support window, at approximately 15:30 CET, all products in the T7 production systems will be set to "Start of Day", providing participants with the opportunity to perform their regular start of day activities:

  • Market data:

After the start of day, product and instrument state change information messages are sent out. Thereafter, snapshots are sent out periodically (MDI, EMDI, EOBI) in addition to functional beacons or heartbeats via the incremental stream in EMDI and EOBI respectively. Traders do not have access to the orderbook.

Please refer to the document “T7 Release 12.0 Market and Reference Data Interfaces Manual" (Section 9.12.0) for further details.  

  • ETI and FIX LF:

– In general, session and user logons are possible.
– ETI: It is possible to send retransmission requests.
– FIX LF: It is possible to send resend requests.
– Orderbook management is not possible.

Please refer to the documents “T7 Release 12.0 Enhanced Trading Interface Manual” (Section 4.7.11) and “T7 Release 12.0 FIX LF Manual” (Section 3.8.11) for further details.

During the support window, a message “Connection Test Eurex <hh:mm:ss>” will appear with an increasing sequence number in the market news view (news board) of the T7 Trader GUI and the T7 Admin GUI. 

Deutsche Börse will inform participants about the general progress of the support window via implementation news on the Eurex website, available under the link:

Support > Information Channels > Implementation News

Following the end of the support window, the T7 12.0 production system will be shut down on Saturday, 18 November 2023 at 18:00 CET and will be unavailable until Sunday evening.

MsgSeqNum’s in FIX LF

Please note that after the connection test, MsgSeqNum’s (inbound and outbound) will not be reset upon the next start of day/start of the FIX Gateway.

This point is documented in the “T7 Release 12.0 FIX LF Manual” in the section “5.10.2 Outage on T7 FIX LF Side”.

D.  Monday, 20 November 2023 – Production start

The first trading day with T7 Release 12.0 will start as usual. 

Please note: As the system will be re-started Sunday evening after the connection test on Saturday, the initial reference data file for the business day 20 November 2023 will be re-generated. As the reference data provided on 18 November 2023 via RDI and RDF prior to the support window may potentially contain some changes, participants are required to use the initial reference data provided following the system start for 20 November 2023.

Orders entered until 17 November 2023 (end of trading) but not executed, will continue to be available on 20 November 2023, unless other validity restrictions were set.

A list of any items that are relevant prior to the production start of T7 Release 12.0 will be provided as of 17 November 2023. This “known limitations” list will be available on the dedicated initiative page under the link:

Support > Initiatives & Releases > T7 Release 12.0 > System Documentation > Production

E.  Technical Contact for the support window

Please enter details of the contact person who will be available during the support window in the Member Section of Deutsche Börse Group not later than Friday, 10 November 2023. The path is: 

Member Section > Company Contacts > [+] Create Contact > Contact Types: Release

Please choose the category “Connection Test Responsible” and make sure to check the box “Eurex T7”.

This will ensure that Eurex will be able to reach you in any emergency between Saturday, 18 November 2023 and production start on Monday, 20 November 2023.

F.  Provision of the Readiness Statement

We kindly ask all Trading Participants to submit the Readiness Statement for T7 Release 12.0 by Friday, 10 November 2023 latest. Please note that all Trading Participants are required to provide the Readiness Statement.

The online Readiness Statement for T7 Release 12.0 can be found here: Readiness Statement

Please enter your dedicated Eurex PIN in the online questionnaire. The PIN for your company has been sent to the Central Coordinator.


Further information

Recipients:

All Trading Participants of Eurex Deutschland and Vendors

Target groups:

Front Office/Trading, Middle + Backoffice, IT/System Administration, Auditing/Security Coordination

Contact:

Technical Key Account Manager via your VIP number or cts@deutsche-boerse.com

Web:

Support > Initiatives & Releases > T7 Release 12.0

Authorized by:

Wolfgang Eholzer


Market Status

XEUR

The market status window is an indication regarding the current technical availability of the trading system. It indicates whether news board messages regarding current technical issues of the trading system have been published or will be published shortly.

Please find further information about incident handling in the Emergency Playbook published on the Eurex webpage under Support --> Emergencies and safeguards. Detailed information about incident communication, market re-opening procedures and best practices for order and trade reconciliation can be found in the chapters 4.2, 4.3 and 4.5, respectively. Concrete information for the respective incident will be published during the incident via newsboard message. 

We strongly recommend not to take any decisions based on the indications in the market status window but to always check the production news board for comprehensive information on an incident.

An instant update of the Market Status requires an enabled up-to date Java™ version within the browser.